*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no: COBI-5898

• Scale: 1:48

• Pieces: 676

• Age: 8+

• Dimensions (inches): 15.5” long, 9.45” wide, 4.72” high

The F-4F Phantom II is a supersonic multi-role fighter used by the German Luftwaffe since the 1970s. The modernized version of the Phantom II has been adapted to the requirements of the German armed forces, serving in both defensive and interceptor missions. With its speed exceeding Mach 2 and a wide range of weapons, it has become one of the symbols of the power of NATO aviation.

The COBI model consists of 676 construction blocks and reproduces the F-4F Phantom II in Luftwaffe colors with the utmost attention to detail. The 1:48 scale set has prints, movable ailerons, an opening cockpit, detachable landing gear and weapons. The set includes a display stand and a plaque with the name of the model. This is a perfect complement to the Armed Forces series and a treat for aviation enthusiasts of all ages!

·      676 high-quality elements

·      Manufactured in the EU by a company with over 35 years of tradition

·      The blocks meet the safety standards of products for children

·      Fully compatible with other brands of construction blocks

·      Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

·      Clear and intuitive instructions based on illustrations and step-by-step directions

·      100% prints, no stickers

·      Block base for the plane

·      Plate with the name of the set

Model dimensions (length x width x height): 395 mm (15.55") x 240 mm (9.45"") 120 mm (4.72"")

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no: COBI-5897

• Scale: 1:48

• Pieces: 703

• Age: 8+

• Dimensions (inches): 14.96” long, 9.45” wide, 4.72” high

The F-4 Phantom II is a supersonic multi-role fighter that has served in the US Air Force since the 1960s. Designed by McDonnell Aircraft it was used in interception, bombing and reconnaissance missions, including during the Vietnam War. It reached speeds of over Mach 2 and carried a wide range of weapons. On the USS Midway aircraft carrier-museum in San Diego the Phantom II is one of the key exhibits. Visitors can see it up close, learning about its role in the history of military aviation.

With 703 COBI construction blocks you can build the iconic F-4 Phantom II aircraft in units from the USS Midway aircraft carrier, which can be visited in San Diego (USA). The licensed set was built based on the plans of the F-4 aircraft maintaining the highest attention to block details. The plane has characteristic prints, movable ailerons and detachable landing gear and weapons. The cockpit opens and can be used to place symbolic mini-figures of pilots. The set includes a block display stand and a plate containing the name and scale of the plane. The 1:48 scale model complements the series of planes released as part of the Armed Forces collection! Build history, piece by piece, with COBI.

·      703 high-quality elements

·      Manufactured in the EU by a company with over 35 years of tradition

·      The blocks meet the safety standards of products for children

·      Fully compatible with other brands of construction blocks

·      Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

·      Clear and intuitive instructions based on illustrations and step-by-step directions

·      100% prints, no stickers

·      Block base for the plane

·      Plate with the name of the set

Model dimensions (length x width x height): 380 mm (14.96") x 240 mm (9.45"") 120 mm (4.72"")

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no: COBI-5899

• Scale: 1:48

• Pieces: 608

• Age: 8+

• Dimensions (inches): 13.98” long, 9.45” wide, 4.72” high

The F-4S Phantom II ""Black Bunny"" is a unique supersonic multi-role fighter that has made aviation history! The most notable and famous use of the bunny image comes from the Navy's Air Test and Evaluation Squadron Four (VX-4) from NAS Point Mugu, CA. This squadron is responsible for operational testing of advanced aircraft systems. In this role, the bunny's head adorned the tails of some of the US Navy's most legendary fighters, including the F-4 Phantom II.

The COBI block model consists of 608 elements allows you to build the iconic F-4S Phantom II in the ""Black Bunny"" version. The licensed set reproduces the plane in 1:48 scale with the utmost attention to detail. It has movable ailerons, an opening cockpit, detachable landing gear and weapons, as well as characteristic prints. The set includes a block display stand and a plate with the name and scale of the plane.

·      608 high-quality elements

·      Manufactured in the EU by a company with over 35 years of tradition

·      The blocks meet the safety standards of products for children

·      Fully compatible with other brands of construction blocks

·      Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

·      Clear and intuitive instructions based on illustrations and step-by-step directions

·      100% prints, no stickers

·      Display stand included

·      Plate with the name of the set

Model dimensions (L x W x H): 355 mm (13.98") x 240 mm (9.45"") 120 mm (4.72")

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no:COBI-5895

• Pieces: 610

• SCALE: 1:48

• 1 figure

• Age: 7+

• PAD PRINTED

• Dimensions (inches): 12.8” long, 8.5” wide, 3.9” high

The F-35®B LIGHTNING II® is a single-seat, multi-role fighter designed by Lockheed Martin. Italy was one of the European countries that have F-35B multi-role fighters, i.e. the short take-off and vertical landing version. The first F-35B machines were delivered to Italy in 2018. Currently, these fighters serve in both the Italian Navy (Marina Militare) and the Italian Air Force (Aeronautica Militare).

With 610 top-quality COBI construction blocks you can build the world's most advanced multi-role fighter, the F-35®B LIGHTNING II®, released under the license of the Lockheed Martin arms mega-concern. The set has been carefully designed in a modeling scale of 1:48. The blocks designed specifically for this set have been covered with high-quality prints. The characteristic pilot's cabin is made in a very realistic way and can be opened to accommodate a pilot figure equipped with a helmet and an oxygen mask with a hose. When you purchase the plane you can also build a block display stand with a plate containing the name of the set!

Thanks to the intuitive instructions the construction is simple and will not cause problems for less advanced builders. The set will also meet the expectations of aviation enthusiasts, military enthusiasts and block enthusiasts. The F-35 will look great in your collection, regardless of your age!

·      610 high-quality elements

·      Manufactured in the EU by a company with over 35 years of tradition

·      The blocks meet the safety standards of products for children

·      Fully compatible with other brands of construction blocks

·      Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

·      Clear and intuitive instructions based on illustrations and step-by-step directions

·      100% prints, no stickers

·      Pilot figure

·      Block display stand

·      Plate with the name of the set

Model dimensions (length x width x height): 32.5 cm (12.8") x 21.5 cm (8.5") 10 cm (3.9")

*FREE SHIPPING AT $50 in the USA

Specifications:

• Catalog no: COBI-5894

• Scale: 1:48

• Pieces: 483

• Age: 7+

• Pilot(s): 2

• Dimensions (inches): 14.” long, 11.2” wide, 5.1” high

With 483 high-quality COBI construction blocks you can build a multi-role Panavia Tornado fighter in the colors of the Italian Air Force (Aeronautica Militare). The plane has been carefully designed in a modeling scale of 1:48 and complements the very rich collection of Armed Forces fighters. The eye-catching beautiful camouflage deserves special attention. The set includes high-quality prints. You will not find stickers here! The model, like the original, has a mechanism that allows you to change the position of the wings (variable wing geometry). We also have an opening cockpit with space for two full-size figures, movable ailerons and wheels.

The plane also has reproduced armament, which includes AIM-9 SIDEWINDER missiles and a BOŻ-102 self-defense pod. The landing gear can be easily removed at any time to display the plane even better on the display stand that comes with the set. Two pilot figures to place in the plane's cockpit or on the stand, as well as a nameplate, are included in the set. Thanks to the intuitive instructions, construction is simple and will not cause problems for less advanced builders. The set will also meet the expectations of aviation, military and block enthusiasts. The legend of the skies, the Tornado, will undoubtedly look great in your Armed Forces collection, regardless of your age!

Italy was one of three countries (along with Great Britain and Germany) that participated in the Tornado development and production program, making it one of the main users of this multi-role aircraft. Tornados were an important element of the modernization of the Italian air fleet, enabling long-distance missions with precision weapons such as laser-guided bombs. During their service, Italian Tornados took part in international operations, including the Gulf War (1991), the Balkans, the Kosovo War (1990s), and the NATO operation in Libya against the forces of Muammar Gaddafi. Italian Tornados are only now being replaced by more modern multirole aircraft, such as the Eurofighter Typhoon and the F-35.

·      483 high-quality elements

·      Manufactured in the EU by a company with over 35 years of tradition

·      The blocks meet the safety standards of products for children

·      Fully compatible with other brands of construction blocks

·      Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

·      Clear and intuitive instructions based on illustrations and step-by-step directions

·      100% prints, no stickers

·      Block display stand

·      Plate with the name of the set

·      Two pilot figures

Model dimensions (length x width x height): 36 cm (14.1") x 28 cm (11 ") 13 cm (5.1")

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no: COBI-5906

• Scale: 1:32

• Pieces: 928

• Figures: 1

• Age: 8+

• Dimensions (inches): 21.2” long, 14.5” wide, 6.3” high

The Sikorsky® UH-60 Black Hawk® model is the return of the iconic helicopter in a new version to the COBI collection!

The set was created based on the original license of Sikorsky® Aircraft Corporation, so when you assemble it you will be able to enjoy an extremely accurate reproduction of this legendary machine!

The Sikorsky® UH-60 Black Hawk® is one of the most important military helicopter designs of the 20th and 21st centuries. Its unmatched mobility, reliability and ability to work in extreme conditions make it present in over 20 countries, participating in numerous combat missions around the world.

Now you can build it and add it to your collection, and the amazing UH-60 Black Hawk® model will make your collection even more unique.

Realistic Model - With a length of 54cm, this helicopter includes rotating propellers, sliding doors, movable stabilizers and details that make each element perfectly reproduce the real equipment.

High Quality of Workmanship - The 1:48 scale set consists of 928 perfectly matched blocks that can be combined very easily.

Figure and Accessories - The set includes a figure of an American pilot in full uniform, an M240 rifle, which is a replica of the weapon mounted on the helicopter, and an additional block separator, which greatly facilitates assembly.

Easy assembly - The instructions included in the set contain detailed explanations that make the process of building the model easy and enjoyable. Each stage is described in detail, and the graphics help to understand how to correctly perform the individual steps.

Unique Collector's Item - Its impressive size and details make it a model that will stand out among other items in your collection.

Ideal Gift - The UH-60 Black Hawk® model will be a perfect gift for any enthusiast of military history and building with blocks. It is a great opportunity to expand their collection with a model that will delight both adults and younger enthusiasts of building, not only military equipment.

The Sikorsky® UH-60 Black Hawk® model is a great choice for anyone who appreciates the durability, technology and modern design of military machines. Perfect for collectors and people of all ages who love building amazing machines with blocks.

Don't wait! See other combat machines from the ARMED FORCES series and impress everyone with your collection from COBI!

·      928 high-quality elements

·      Manufactured in the EU by a company with over 35 years of tradition

·      The blocks meet the safety standards of products for children

·      Fully compatible with other brands of construction blocks

·      Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

·      Clear and intuitive instructions based on illustrations and step-by-step directions

·      1 pilot figure

Model dimensions: 54 x 16 x 37 cm

Box dimensions: 45 x 7 x 28 cm

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no: COBI-5891

• Scale: 1:48

• Pieces: 1374

• Figure(s): 1

• Age: 8+

• Dimensions (inches): 25.4” long, 17.9” wide, 5.1” high

The SR-71 Blackbird was an American reconnaissance aircraft that served in the United States Air Force from the 1960s to the 1990s. It was designed by Lockheed Martin and was one of the fastest aircraft in the world. Its maximum speed exceeded Mach 3 (over 3,700 km/h), and thanks to its operational altitude of up to 26 km, it was difficult for anti-missile defense systems to shoot down. The SR-71 had an advanced design, using titanium, which allowed it to withstand the extreme temperatures generated during supersonic flight. It was mainly used for intelligence gathering, and its ability to escape from enemy missiles was a legendary asset. From 1374 high-quality blocks you can build the legendary SR-71 plane in a modeling scale of 1:48.

The Blackbird appears for the first time in the COBI offer. The set has been carefully designed, so its construction will bring a lot of satisfaction to the demanding builder. Detachable landing gear, movable wing ailerons and an opening cockpit with space for figures are its basic aviation functionalities, which you will discover during construction. The model has been covered with durable prints depicting US Air Force markings. The set also includes a USAF pilot figure in a characteristic uniform reminiscent of astronaut suits!

The whole set is complemented by a block display stand with a plate containing the name of the set and the Lockheed Martin logo. Thanks to the intuitive instructions construction is simple and will not cause problems for less advanced builders. The set will meet the expectations of aviation fans, military enthusiasts and building block hobbyists. The SR-71 Blackbird will look great both in an adult collector and in a teenager's room. Build history, piece by piece, with COBI!

·      1374 high-quality elements

·      Manufactured in the EU by a company with over 35 years of tradition,

·      Meet safety standards for children's products,

·      Fully compatible with other brands of construction blocks,

·      Only durable prints without the use of stickers were used,

·      Clear and intuitive instructions based on drawings and icons,

·      Scale 1:48

Model dimensions (length x width x height): 67.5cm (26.57") x 33.5cm (13.19") x 12.5cm (4.92")

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no: COBI-5890

• Scale: 1:48

• Pieces: 1379

• Figure(s): 2

• Age: 8+

The SR-71 Blackbird was an American reconnaissance aircraft that served in the United States Air Force from the 1960s to the 1990s. It was designed by Lockheed Martin and was one of the fastest aircraft in the world. Its maximum speed exceeded Mach 3 (over 3,700 km/h), and thanks to its operational altitude of up to 26 km, it was difficult for anti-missile defense systems to shoot down. The SR-71 had an advanced design, using titanium, which allowed it to withstand the extreme temperatures generated during supersonic flight. It was mainly used for intelligence gathering as its ability to escape from enemy missiles was a legendary asset. From 1379 high-quality COBI blocks you can build the iconic SR-71 plane in a modeling scale of 1:48.

This plane appears for the first time in the COBI collection. The set has been carefully designed and its construction will bring a lot of satisfaction to the demanding builder. Detachable landing gear, movable wing ailerons and an opening cockpit are just some of the aviation functionalities that you will discover during construction. It has been covered with durable prints showing US Air Force markings. Also, the plane has NASA markings available only in the Executive Edition. In addition, the plane has two vibrant flames emerging from the powerful Pratt-Whitney engines. The set also includes figures of two pilots: a USAF pilot and a NASA pilot. They are dressed in characteristic suits with helmets designed for flying at very high altitudes.

The whole set is complemented by a block display stand with a plate containing the name of the set and the Lockheed Martin logo. Thanks to the intuitive instructions construction is simple and will not cause problems for less advanced builders. The set will meet the expectations of aviation fans, military enthusiasts and building block hobbyists. The SR-71 Blackbird will look great both in an adult collector and in a teenager's room. Build history, piece by piece, with COBI!

·      1379 high-quality elements

·      Manufactured in the EU by a company with over 35 years of tradition

·      The blocks meet the safety standards of products for children

·      Fully compatible with other brands of construction blocks

·      Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

·      Clear and intuitive instructions based on illustrations and step-by-step directions

·      Scale 1:48

Model dimensions (length x height): 71cm x 12.5cm

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no: COBI-2629

• Scale: 1:35

• Pieces: 665

• Age: 8+

• Dimensions (inches): TBD

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no: COBI-2628

• Scale: 1:35

• Pieces: 1006

• Age: 8+

• Dimensions (inches): 13.58” long, 4.33” wide, 4.33” high

Panzerhaubitze 2000 is one of the most advanced artillery systems in the world. Thanks to its technology, range and precision the PzH 2000 plays a key role in modern combat operations, providing effective fire support. It is a symbol of modern artillery and proof of the advanced technology of the German arms industry. We proudly present this legendary self-propelled howitzer released in cooperation with the Deutsches Panzermuseum in Munster.

Made of over a thousand elements, the model has all the features of its original. Working tracks, a rotating turret and a movable barrel of the powerful 155mm howitzer are just some of the many features of this set. The set also has a reproduced camouflage and all the markings and design details are imitated using prints. The brick PzH 2000 also has opening hatches and a movable frame to stabilize the huge barrel. On its turret there is an on-board MG3 machine gun. Panzerhaubitze 2000 is definitely a model that must be in the collection of every fan of the Armed Forces and enthusiast of modern armored weapons and military technology.

Work on the PzH 2000 began in the 1980s as part of the German Bundeswehr's artillery modernization program. The goal was to create a modern self-propelled howitzer that would replace older models like the M109. Prototypes of the PzH 2000 were tested in the early 1990s and the test results were promising, which led to the decision to start serial production. The PzH 2000 was introduced into service with the Bundeswehr in 1998. It is also used by several other countries such as the Netherlands, Italy, Greece, Lithuania and Croatia.

The PzH 2000 is characterized by a high rate of fire, long range and an advanced fire control system, which makes it an extremely effective fire support tool on the battlefield. The ability to fire quickly and with advanced aiming systems allows for quick and precise targeting. The PzH 2000 has been used in various international operations, including NATO missions in Afghanistan. Its advanced artillery capabilities have proven to be extremely useful in demanding combat conditions, providing fire support for land forces. These vehicles are currently used in combat in Ukraine.

•        1006 high-quality elements

•        Manufactured in the EU by a company with over 35 years of tradition

•        The blocks meet the safety standards of products for children

•        Fully compatible with other brands of construction blocks

•        Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

•        Clear and intuitive instructions based on illustrations and step-by-step directions

•        Scale 1:35

Model dimensions (length x width x height): 34.5 cm x 11 cm x 11 cm

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no:COBI-2622

• Pieces: 975

• SCALE: 1:35

• 1 figure

• Age: 7+

• PAD PRINTED

Abrams is one of the best tanks of the modern battlefield! It has been produced since 1980 by the American defense company General Dynamics Land Systems. The tank is constantly being modified to meet new standards that increase its combat value. A characteristic feature of the tank is the turret, which takes up almost as much space as the rest of the tank. In its design, the Abrams boasts multi-layer armor, which provides a high level of protection against HEAT rounds. Abrams tanks were first used in combat in the early 1990s during Operation Desert Storm. Since then, Abrams have been involved in successive military conflicts involving the United States. This set recreates its appearance in the Second Gulf War in 2003.

From this set of COBI construction blocks you can build an Abrams tank in the M1A2 version, developed under the license of General Dynamics Land Systems. The model was reproduced in a sensational scale of 1:35. The latest version of this cutting-edge tank is even more detailed. It became possible thanks to the use of new blocks from the ever-growing catalog of elements created by COBI. The model has only high-quality prints that do not wear off during use. The vehicle has working tracks and opening hatches to place the crew. The vehicle's turret and barrel are movable. Under the removable service hatch there is an engine modeled from bricks. The Abrams tank has been enriched with accessories such as: a block sack, spare tracks, ammunition and two machine guns. The set includes a very interesting figure of an American tanker equipped with a personal pistol.

• 975 high-quality elements

• Produced in the EU by a company with over 20 years of tradition

• The blocks meet the safety standards of products for children

• Fully compatible with other brands of construction blocks

• Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

• Clear and intuitive instructions based on illustrations and step-by-step directions

• American tanker figurine

Model dimensions (L x H): 27.5 cm (10.8") x 11.5 cm (4.5") x 11 cm (4.3")

*FREE SHIPPING AT $50 in the USA

Specifications:

Catalog no: COBI-5892

• Scale: 1:48

• Pieces: 375

• Figure(s): 1

• Age: 8+

• Dimensions (inches): 12.2” long, 8.7” wide, 4.3” high

F-16 (YF-16) First Flight 1974 - a unique edition of the iconic aircraft that has been defending the skies of dozens of countries around the world for 50 years. Its first flight took place on February 2, 1974. We decided to recreate the prototype's characteristic paint scheme and a figure as a tribute to the test pilot!

With 375 of the highest quality COBI construction blocks you can build the world's most popular fighter-attack aircraft F-16® FIGHTING FALCON®, released under the license of the Lockheed Martin arms mega-concern, in the colors of its first flight in 1974! The set has been carefully designed in a modeling scale of 1:48. The blocks have been covered with high-quality prints. The US Air Force emblems look great on this colorful model. The pilot's cabin made using two-color injection technology is a confirmation of COBI's high quality construction techniques! The set includes a pilot figure in a very characteristic suit, equipped with a helmet and an oxygen mask with a hose. The whole set is complemented by a block display stand with a plate containing the name of the set, the national flag, the scale and the Lockheed Martin logo!

Thanks to the intuitive instructions, construction is simple and will not cause problems for less advanced builders. The set will also meet the expectations of aviation enthusiasts, military aficionados and block fans, alike. The F-16 will look great both in an adult collector and in a teenager's room. Create your own air force with COBI.

·      375 high-quality elements

·      Produced in the EU by a company with over 20 years of tradition

·      The blocks meet the safety standards of products for children

·      Fully compatible with other brands of construction blocks

·      Blocks with prints do not scratch or smear and do not fade during play or under the influence of temperature

·      Clear and intuitive instructions based on illustrations and step-by-step directions

·      Scale 1:48

Model dimensions (length x width x height): 31cm x 22cm x 11cm